HDPE for Blow Molding

---

HD-5403GA is a medium molecular weight copolymer grade with a broad molecular weight distribution. It is intended for blow molding applications that require high top load resistance and environmental stress crack resistance to meet the most demanding end use applications.

APPLICATIONS
Blow-molded containersup to 5 liters for packaging:

• Industrial Chemicals
  
• Household Chemicals
  
• Foodstuffs
  
• Personal Care Products
  

PHYSICAL PROPERTIES	TEST REFERENCE	UNIT	TYPICAL VALUE1
MFI, 190°C/ 2.16	ASTM D 1238-98	g/10min	0.33
MFI, 190=C/ 21.6	ASTM D 1238-98	9/10min	34.0
Density, non-annealed	ASTM D 1505-98	g/cm³	0.953
MECHANICAL PROPERTIES
Flexural Modulus	ISO 178-1975	MPa	1000
Tensile Strength at Break MD/TD	ISO R527-1966: Type 2	MPa	28
Elongation at Break MD/TD	ISO R527-1966: Type 2	%	>900
Charpy Impact Strength, Notched	ASTM D 256-97	kJ/m²	7
ESCR, F50, 10% lgepal	ASMT D 1693-98: Condition B	hrs	20
THERMAL PROPERTIES
Melting Point	ASTM D 2117	°C	130

1Typical value should not be construed as specification limits. They are intended to serve as guide only.