Products and Application
HD6070EA
HDPE for Injection Molding
HD6070EA is a narrow molecular weight high density polyethylene. It is suitable for a wide variety of injection and compression molding applications. HD6070EA offers high rigidity, good processability and low warpage.
APPLICATIONS
- Caps and Closures (non beverages)
- Crates, Boxes, and Bins
- Cartridges and technical parts
- Structural Foams
| PHYSICAL PROPERTIES |
TEST REFERENCE |
UNIT |
TYPICAL VALUE1 |
| ASTM D 1238-98 |
ASTM D 1238-98 |
g/10min |
7.6 |
| Density, non-annealed |
ASTM D 1505-98 |
g/cm³ |
0.960 |
| MECHANICAL PROPERTIES |
| Tensile Stress at Yield |
ISO/ R527 (1&2) |
MPa |
31 |
| Tensile Modulus |
ISO/ R527 (1&2) |
MPa |
1500 |
| ESCR, 23°C |
ISO 1693-98 |
hrs |
60 |
| Charpy Impact Strength, Notched |
ASTM D 256-97 |
kJ/m² |
6 |
| THERMAL PROPERTIES |
| Melting Point |
ASTM D 2117 |
°C |
132 |
1Typical value should not be construed as specification limits. They are intended to serve as guide only.
For Additional Information and Technical Assistance:
- Tel No: +63 47-244-8612
- Fax No: +63-47-244-8173
.gif) .gif) |
Others
|
