HDPE for Injection Molding

---

HD6070UA is a narrow molecular weight high density polyethylene with UV stabilizer. It is suitable for a wide variety of injection molding applications. HD6070UA offers high rigidity, good impact strength and good weatherability.

APPLICATIONS

• Boxes and Buckets
• Pallets and Crates
• Automotive parts
• Seats

PHYSICAL PROPERTIES	TEST REFERENCE	UNIT	TYPICAL VALUE1
MFI, 190°C/ 2.16	ASTM D 1238-98	g/10min	7.6
Density, non-annealed	ASTM D 1505-98	g/cm³	0.960
MECHANICAL PROPERTIES
Tensile Stress at Yield	ISO/ R527- 1996	MPa	31
Tensile Modulus	ISO/ R527- 1996	%	>300
ESCR, 23°C	ISO 178- 1975	MPa	1250
Charpy Impact Strength, Notched	ASTM D 256-97	kJ/m²	6
THERMAL PROPERTIES
Melting Point	ASTM D 2117	°C	132
Thermal Conductivity	ASTM C 117	W/m ºC	0.48
ADDITIVES : UV STABILIZER

1Typical value should not be construed as specification limits. They are intended to serve as guide only.

For Additional Information and Technical Assistance:

• Tel No: +63 47-244-8612
• Fax No: +63-47-244-8173
•